Cara Program Access Control Reader S20K


Specification :

Power Supply

12V DC / 1.2.A

RFID Card Capacity           

1000 Pcs

Password

Universal Password 1, PIN 1000

RFID Protocol Support

125Khz EM4100 or More.

Range            RFID Reading

5 – 10 CM

Factory Default Setting :

Program Password 

881122

Door Open Mode

Default Password : 1234

Valid Card PIN

0000

 Sound Led Function :

Valid Command

a short beef sound

Invalid Command

a beef sound

 Programing Mode :

Green LED Keep on Continuously

 

Valid Command

“ du-du “         = 2 Kali Beep Sound.

Invalid Command

“ du-du-du”     = 3 Kali Beep Sound.

 

Cara Menggunakan Access Control S20K

Cara Ganti Password Default (Program) :

·         Tekan # + Input Password Program (Default 881122)
·         Tekan 0 + Masukan Password baru (6 Digit) + Input Kembali Password Baru
·         Tekan #

Cara Menambahkan / Registrasi Kartu Baru :

·         Tekan # + Input Password Program ( Default 881122)
·         Tekan 5 + Tekan 4 Digit Kode (Misal : 0001, 0002, etc.)
·         Tap Kartu Yang Akan Di Registrasi, Akhiri Dengan #

Cara Hapus Kartu :

·         Tekan # + Input Password Program (Default 881122)
·         Tekan 7 + Tekan 4 Digit Kode Yang Akan Di Hapus (Misal : 0002)
·         Akhiri dengan #

Keypad Unlock Password :

§  Default Keypad Password “ 1234 “
§  Default Card + PIN “ 0000”

Cara Mengganti Keypad Password Default :

·         Tekan # (2 Detik)
·         Tekan 3 + Input 4 Digit Password Baru, #

Factory Default Setting :

·         Tekan # (2 Detik)
·         Tekan 85, Tunggu Prosess Reset Factory 5 Detik.

Factory Default Setting PCB :

·         Jumpper PIN J2